Hello! Welcome to Guilin GM Technology Industry Ltd.!

PRODUCTS

Phone:0773-5850657

Fax:0773-5814532

Service:Miss.Yu

Mobile:Mr. Qin 18977333475

E-mail:5803731@163.com

Address:High-tech Zone Guilin, Guangxi, China Yi Feng South Road on the 16th

Mr. Qin
PRODUCTS
Current Location:Home >> PRODUCTS

GMTI-2012 control panel

GM2000 SERIES GENSET CONTROLLER         Version1.0

    INSTALLATION INSTRUCTIONS

The contents are intended for quick guidance and supplement supplement to the user who is using GM2000Ccontroller.                      

Please read the standard manual for more details.

GM2000C controller has four variants as shown

Note1:GM2011C/GM2012Cwith RS485 interface,GM2011/GM2012 without RS485 interface.

Note2: GM2011C/GM2012C is taken as an example to describe in this manual.

1   KEY FUNCTION DESCRIPTION

 

 

Stop/ Reset

 

Can stop generator under mode of Manual/Auto; Can reset shutdown alarm;press this key at least 3 seconds to test panel indicators are OK or not (lamp test); During stopping process, press this again can stop generator immediately.

Start

Start genset under Manual or Auto mode.

Manual

Pressing this key will setthe the module as Module mode.

Auto

Pressing this key will setthe the module as Auto mode.

Running with load

controller is under manual testing mode. Under this mode, genset will run with  load automatic when gens are normal. (GM2011Cwithout).

Set/ Confirm

Enters into Set menu after pressing this, and can shift ursor to confirm.

Page up/increase

Screen scroll;Shift cursor and increase values.

Page Down/Decrease

Screen scroll;Shift cursor and decrease values.